Services | Port Hadlock Roofing & Maintenance | Port Hadlock, WA
Port Hadlock Roofing & Maintenance offers a complete range of roofing services in Port Hadlock and Naselle, Point Roberts, Satsop, Thorp, Winlock. Every job gets the same attention. Big or small.
Roof Replacement
Your roof replacement includes a full-system install: ice and water shield at eaves, valleys, and penetrations; synthetic underlayment across the entire deck; aluminum drip edge at rake and eave; starter strip with sealant; architectural shingles with 130+ mph wind rating; and continuous ridge vent for proper attic ventilation. We also install new pipe boots and vent flashing on every penetration.
Get a Free Quote →Roof Repair
Missing shingles from wind damage expose the underlayment to UV degradation. If the underlayment is compromised, water intrusion follows the next rain. We don't just replace the missing shingle. We pull back surrounding courses, inspect the underlayment for UV damage and nail holes, replace compromised sections, and weave new CertainTeed Landmark or IKO Cambridge shingles into the existing field. Proper repair, not a patch.
Get a Free Quote →Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our Port Hadlock inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →New Roof Installation
We install new roofs on new homes, additions, detached garages, carports, and covered patios. Material options include asphalt architectural shingles, metal standing seam, metal corrugated, and flat membrane systems. We help you choose based on your budget, aesthetic preference, and the specific demands of your Port Hadlock climate.
Get a Free Quote →Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →Shingle Roofing
Architectural shingles are what we install on 90% of Port Hadlock homes. They're thicker, heavier, and more wind-resistant than the old 3-tab flat shingles. They also look dramatically better. Dimensional profiles that mimic wood shake or slate. Standard architectural shingles carry a 30-year warranty. Premium versions go to 50.
Get a Free Quote →Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Port Hadlock. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →Commercial Roofing
We install Carlisle SynTec and Firestone TPO membrane systems in 60-mil and 80-mil thickness over minimum R-25 polyiso insulation (more in climate zones requiring it). Seams hot-air welded at 900°F+ and tested with a seam probe. Fully adhered systems for wind uplift zones per FM I-90 or I-120. Mechanically attached for re-roofs over existing insulation. NRCA member, trained per manufacturer specifications.
Get a Free Quote →Gutter Installation
Gutter replacement in Port Hadlock costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →Roof Inspection
Our 27-point residential roof inspection: (1) shingle condition and granule loss, (2) nail pops, (3) lifting tabs, (4) ridge cap integrity, (5) valley flashing, (6) step flashing at walls, (7) chimney flashing and counter-flashing, (8) drip edge condition, (9) pipe boot seals, (10) plumbing and HVAC vent integrity, (11) ridge vent function, (12) soffit ventilation, (13) gutter pitch and capacity, (14) downspout drainage, (15) fascia condition, (16) soffit condition, (17) ice dam evidence, (18) moss or algae growth, (19-27) attic: decking moisture, insulation displacement, rafter condition, bathroom exhaust routing, daylight penetration, ventilation balance, mold indicators, pest intrusion, previous repair evidence. Written report with annotated photos emailed same day.
Get a Free Quote →Emergency Roof Repair
We don't charge extra for emergency tarp jobs. The tarping cost is rolled into the permanent repair price. If you need us at midnight during a storm, the price is the same as a Tuesday afternoon.
Get a Free Quote →Skylight Installation
Skylight installation includes cutting the roof opening, framing a curb with doubled 2x lumber, installing the unit with factory sealant, and weaving the step flashing into the surrounding shingle courses. Interior work includes drywall framing and trim. We handle the full job in Port Hadlock. Outside and inside.
Get a Free Quote →